While homeowners call it low water pressure, plumbers refer to the issue as low flow. However, you are in luck because there are different methods to solve such issues. However, before attempting to fix them, you must try and understand exactly what creates low water pressure.
Some causes for it could be: an accumulation of mineral deposits in the pipes, particles in the water, pressure regulators, water valves, leakages, and reduced pressure of water coming from the supplier. Recognizing the cause of the problem is therefore, the initial step towards correct repairs. However, some cases are solved with easy troubleshooting; by exploring all the feasible causes and doing the needed repairs.
Amongst the above reasons for reduced flow, one of the frequently determined causes is debris in the water. The majority of plumbing installations, having old iron pipes, show rust buildup which breaks loose and clogs up valves, aerators, or any place where there could be a restriction. A certain buildup of Algae is also seen in our water much of the time.
Algae appears a bit like fine sawdust, and is seen a bit more in the water that comes to our residences from time to time. Plastic pipes fitted near water heaters could disintegrate and pieces of PVC might clog plumbing fixtures. If the water department chooses to do some work on their pipes, you could discover gravel or rust in the pipes of your house as well My Tucson Plumber .
If you discover reduced flow in your sink faucet, before calling a plumbing contractor to come over and have a look at it, you might try some things that might help fix the problem yourself. You could first remove the aerator found at the end of the water spout, and monitor the amount of water flowing without it. If you see that the flow is fine, you should wash or replace the aerator.
But, if the water pressure is still low, the problem will be further downstream. If this holds true, you may be into bit of a larger problem. The valve which shuts off the water to the specific faucet may be blocked. You could disconnect the pipe from the faucet and see how the water pressure is. If it is too advanced for you to do by yourself, you should get the services of a really good plumber so that the problem will be resolved properly.
Discovering a really good plumber is not hard. There are many ways to locate one, however, the best way, as many people do, is to get a recommendation from a buddy or family member who has received their services before. If not, you will certainly discover many of them providing their services online also.
